2020-2021 Marker Alpinist 12

Blister reviews the Marker Alpinist 12
Marker Alpinist 12, 18/19 Graphics

Marker Alpinist 12

Release Value Range: 6-12 (adjustable lateral release, fixed vertical release based on U-spring)

Available Brake Widths: 90, 105, 115 mm

Available Crampon Widths: 80, 90, 105, 120 mm

Climbing Aids: Flat, 31, 40 mm

Forward Elastic Travel: 4 mm

Mounting Pattern Width: 38 mm (toe), 36 mm (heel)

Heel Mounting Gap: 0 mm

BSL Adjustment: 15 mm (30 mm demo track available)

Stated Weight: 335 grams (with 105 mm brakes)

Blister’s Measured Weight:

  • Toe Pieces: 124 & 124 g
  • Heel Pieces: 143 & 144 g*
  • Brake Units (105 mm): 99 & 99 g
  • Screws (toe+heel): 17 & 17 g
  • Total Weight: 383 & 384 g

*Our pair of Alpinists came with the long demo heel track (30 mm of adjustment vs 15 mm for the standard), which likely weighs a few grams more than the standard heel track.

MSRP: $395 USD

Boots Used: Scarpa Maestrale RS; Nordica Strider 120; Tecnica Zero G Tour Pro; Salomon S/Lab MTN

Ski Used: Salomon MTN Explore 95

Test Locations: Rocky Mountain National Park, Black Mountain, & Arapahoe Basin, CO

Days Tested: 7

[Note: Our review was conducted on the 18/19 Alpinist 12, which was not changed for 19/20 or 20/21, apart from graphics.]

Intro

The Alpinist 12 is Marker’s first foray into minimal touring bindings, and it’s also the first binding we are taking a look at in our Lightweight Touring Binding Shootout. We strongly encourage you to read the intro to our Shootout, since it spells out how exactly we chose, tested, and compared the bindings in the review.

But here’s the CliffsNotes version: we mounted four pairs of 300-400 gram touring bindings on the exact same ski to test them all head-to-head. The bindings we’re including are the Alpinist 12, the Dynafit TLT Speed, The Hagan Core / ATK Raider 12 2.0, and the Atomic Backland Tour / Salomon MTN.

The Alpinist 12 is one of the most fully featured bindings in the test, yet it still comes in at a very similar weight to the other options. So how does it actually perform in the mountains? Blister reviewer Luke Koppa and I have both been using the Alpinist 12, so we’ll both be weighing in here.

Design

Sam Shaheen: The Alpinist 12 doesn’t feature any really radical design departures from other tech bindings, but what makes the Alpinist unique is how it combines all of those features while coming in at a weight that’s closer to more minimal options.

Toe Piece

Sam: The toe piece on the Alpinist is pretty standard. It has a very similar design to the Marker Kingpin toe, but with only two springs (instead of the six on the Kingpin) and a slightly different geometry.

The Alpinist’s toe seems to work quite well. It feels solid and the retention has been quite good during our testing. This could potentially be due to the Alpinist toe’s higher pivot point, which is roughly 3 mm higher than that on the toe pieces of the Dynafit TLT Speed and Rotation 10. The G3 Ion’s toe piece also has a higher pivot point, and we’ve found that binding to offer very good toe retention, too.

Blister reviews the Marker Alpinist 12
Marker Alpinist 12 — Toe Piece

I’ve skied some pretty firm, rough, steep snow on the Alpinist and haven’t yet experienced any pre-releases, or felt the need to lock out the toe (even in situations where I would have locked out the toes on a binding like the Dynafit TLT Speed).

The Alpinist toe also feels more solid when stepping in compared to the Kingpin’s toe (however counter-intuitive that may be).

The only downside of the Alpinist toe is that it is fairly difficult to step into compared to the other bindings in our test. There are two pieces of white silicone rubber on the Alpinist toe that create a pseudo toe-stop to help with stepping in, but in practice, they are little more than visual aids. In most tech bindings, I can step in on my first try about 90% of the time, but with the Alpinist, that number is probably closer to 60%.

Luke Koppa: I agree. I found the Alpinist to be one of the most difficult bindings in this test when it came to stepping in (the Atomic Backland Tour was similarly difficult). I did start to get the hang of stepping into the Alpinist after a few days, but even then, I still found that it often took me a couple tries to successfully step into the Alpinist.

Heel Piece

Sam: The heel of the Alpinist is where this binding really stands out. Like most tech bindings, the Alpinist’s heel tower rotates for lateral release and to transition between ski mode and walk mode.

The Alpinist heel has adjustable release values for lateral release, with the Alpinist 12 having lateral release values from 6-12, and the Alpinist 9 being adjustable from 4-9.

Vertical release on the Alpinist is controlled by its U-spring. Marker will sell three different U-spring options of varying levels of strength to adjust this (they call them “soft,” “medium,” and “hard”). The Alpinist 12 comes standard with the strongest “hard” spring, and the Alpinist 9 comes with the “medium” spring.

The most intriguing feature on the Alpinist is the active length compensation in the heel. Just like some of the best performing pin bindings on the market (e.g., Fritschi Vipec EVO and G3 ION), the Alpinist heel is designed to be mounted flush with the heel of the boot. As the ski flexes, the Alpinist heel piece moves on a track to compensate for the change in length due to ski flex. This feature is meant to increase the consistency of release and it also creates a better connection between the boot and ski. We’ll get more into the downhill feel of the binding further down, but the spoiler is: the Alpinist feels very smooth for how light it is.

There is one curious and disconcerting behavior we’ve noticed with the Alpinist heel tower. When stepping into the binding in ski mode, the whole heel tower tilts forward as you weight the pins. There is probably 1-2 mm of movement at the top of the tower when fully weighted. This is certainly a point of concern with the Alpinist, but to the binding’s credit, we haven’t been able to feel this play on the downhill, and haven’t yet had any durability issues. We’ll obviously keep this review up to date if that changes.

Brakes

Sam: The Alpinist also comes with the option of leashes or brakes (our pair came mounted with brakes). Unlike some tech bindings, the Alpinist brake cannot be added or removed without taking the binding off the ski, since the brake fits in a slot underneath the heel tower.

The brake is one of the weakest design points on the Alpinist. First, the brake arms hardly extend beyond the bottom of the ski. This isn’t an issue when putting the skis on a flat surface, but because of how small they are and how little they extend below the ski, the brakes offer very little stopping power, and we doubt they would do much (if anything) in the case of a runaway ski on a steep slope. With that said, the Alpinist’s brakes are probably pretty similar to those on the Hagan Core, as neither of these brakes offer as much stopping power as the brakes on heavier tech bindings.

Blister reviews the Marker Alpinist 12
Marker Alpinist 12 — Brakes Unlocked (left) and Locked (right)

The Alpinist’s brake lock mechanism is also a bit finicky. The brake lock is controlled by a small wire bail on the back of the heel track. Pushing the bail towards the tip of the ski allows the brake to lock, and pulling the bail towards the tail unlocks the brake. The issue here is that while skiing (when the brake needs to be unlocked to stop the ski in the event of a release), it is relatively easy to accidentally knock the brake lock mechanism into the “locked” position with your other ski, negating the usefulness of the brake in downhill mode. So it’s important to keep an eye on the brake lock to make sure it’s in the “unlocked” position.

Uphill Performance / Transitions

Sam: Uphill performance consists of far more than just weight (though a low weight certainly helps). The Alpinist uses tried and true design elements to create a simple, functional binding on the up, though not every one of its features feels totally refined / dialed in.

The Alpinist’s heel piece rotates to switch to uphill mode. It is possible to rotate the heel with a pole tip like on other bindings, but on the Alpinist, this is quite a chore. On other bindings with rotating heels (e.g., the Dynafit Radical 2.0 or Speed Rotation), the heel piece rotates about 90-120° before reaching a point of no return and snapping into place (in either walk mode or ski mode).

On the Alpinist, this snapping action only takes care of the last few degrees of rotation. As a result, I have to rotate the heel piece almost the full 180° with my pole tip, which has led to some very odd trailside acrobatics. Of course, you can also just kneel down and rotate the heel by hand, but it would nice to be able to more easily transition using a pole.

Once in uphill mode, the Alpinist walks very well. It feels light on the feet (as it should, given its weight) and the toe lock-out feels solid and confidence-inspiring.

Blister reviews the Marker Alpinist 12
Sam Shaheen on the Marker Alpinist 12, Rocky Mountain National Park, CO.

The Alpinist’s heel risers seem to be built well, but they are some of the most difficult to use in our test. The Alpinist has three climbing levels: flat (heel rotated back, riser back); medium (heel rotated forward, riser forward); and high (heel rotated back, riser forward). To access the medium climbing position, you have to rotate the heel piece (which, as just discussed, isn’t the easiest thing to do).

In practice, this isn’t that big of a deal, since the heel risers are so short overall. I find myself just switching between the “flat” and “high” modes so I don’t have to deal with rotating the heel. At 40 mm above the “flat” touring position, the highest riser on the Alpinist is about the same height as the medium risers on the Salomon MTN / Atomic Backland and ATK Raider 12 2.0 / Hagan Core 12.

I’ve definitely been left wishing for a higher riser position for some skin tracks. If you tend to find yourself on steep skin tracks (I’m looking at you, Lake Tahoe), then the heel risers on the Alpinist might be a deal breaker. But if you like to set (or, let’s be honest — follow) more mellow skin tracks and don’t rely as much on your binding’s high risers, this will be less of an issue.

Another slight annoyance with the Alpinist is the balance point. This isn’t unique to the Alpinist in our test, but rather, the lighter that any binding’s heel piece is, the farther forward the balance point ends up being. This means that on kick turns, the tip of the ski has a tendency to dip rather than pop up (like it does on most skis with heavier heel pieces). With lighter bindings like the Alpinist, a bit more “kick” in your kick turns tends to help keep the tip up. This is a small price to pay for the huge decrease in weight, just something to keep in mind.

Downhill Performance

Sam: We’ve been A/B/C/D-ing all of the bindings in this test against each other for several weeks now, and there are a few important overall takeaways from our testing.

First, the downhill performance of each binding is surprisingly similar. If we weren’t skiing them directly back-to-back, I doubt we would be able to discern many performance differences.

Second (and perhaps even more surprising) is how hard we were able to ski on these bindings without pre-releasing or breaking anything — including ourselves.

Much of our downhill-performance testing was done inbounds on firm or soft, chopped-up snow and at very high speeds. All of the bindings in the test performed surprisingly well (though the real standout in our Shootout was easily the ski — the Salomon MTN Explore 95 that we had all the bindings mounted on is just soooo good.

Though all the bindings performed pretty similarly in terms of downhill performance, the Alpinist did have the most distinct performance characteristics out of the group, in that it felt smoother than all the other bindings we tested. There is less feedback transferred to the boot in rough, icy snow. The Alpinist also provides a smoother feel when blasting through large piles of softer, chopped-up snow.

This smoothness is subtle, but noticeable.

The Alpinist also edges out the ATK Raider 2.0 / Hagan Core in terms of power transfer, putting the Alpinist at the top of the group. This is again, pretty subtle, but noticeable when skiing the skis back-to-back. It is worth noting though that we do not have the Freeride Spacer on our ATK Raider 2.0 / Hagan Core 12 binding, and we suspect it would improve that binding’s power transfer (though at a slight weight penalty).

Blister reviews the Marker Alpinist 12
Luke Koppa on the Marker Alpinist 12, Arapahoe Basin, CO.

One of the performance characteristics that I didn’t expect to notice between the bindings was how much they’d affect the amount of rebound and energy transmitted from the ski. I think the smooth feeling of the Alpinist that helps to dampen out some vibrations also takes a bit of the energy out of the ski when transitioning turns. Both the Raider 2.0 / Core and MTN / Backland felt like they transferred more energy and pop from the MTN Explore 95 compared to the Alpinist.

Luke: When it came to skiing hard and fast, the Alpinist was definitely my favorite binding in our test. I was very surprised by how smooth it felt, especially given its very low weight. We were straight-up mobbing down A-Basin’s slushy, chunky summer groomers, and I was pretty blown away by how little feedback I was getting from the Alpinist.

The Alpinist did feel harsher than an alpine binding (duh), but still, the Alpinist’s downhill performance was impressive. And as for Sam’s note about the energy he felt transferred by the bindings, I can’t say I noticed a big difference, and I’d personally take in a heartbeat the better damping of the Alpinist over the other, harsher bindings.

The really important caveat here is that I spent most of my time on the Alpinist in fairly soft, to very slushy snow, so it wasn’t the harshest snow in the first place. But even in this soft snow, the Alpinist was notably smoother than all the other bindings in the test.

I’m very curious to A/B the Alpinist against some burlier tech bindings like the Dynafit Rotation 10 and Fritschi Vipec Evo in order to see how much of a downhill-performance upgrade you get for a couple hundred grams more. But based on my time on the Alpinist, I’m inclined to think it’s not actually that much. We’ll see.

Safety / Release

Sam: The Alpinist is a U-spring binding with adjustable lateral release.

U-spring bindings have been shown to prematurely wear out the pin inserts in touring boots and change the release characteristics over time (in some cases, release characteristics can change dramatically). This is in contrast to heavier tech bindings that have separate heel pins which move much more easily around the boot heel insert when stepping into the binding. Every time you step into a U-spring binding, the spring itself needs to bend outward to get around the boot heel insert, which is more abrasive than bindings with independent heel pins (e.g., Dynafit Rotation 10, G3 Ion, Fritschi Vipec Evo).

For more on the potential safety issues with U-spring bindings, check out our podcast with some of G3’s engineers where they discuss this topic around the 41:00 mark.

U-spring bindings also have much less adjustability when it comes to vertical release, since you have to change the spring itself to change the release value.

Though these points count against the Alpinist, the binding does have active length compensation which should increase consistency of release compared to the other bindings in this test that require a gap between the heel piece and boot to compensate for ski flex.

If safety is your primary concern, I would recommend the ATK Raider 2.0 / Hagan Core binding. That binding is fully adjustable in both vertical and lateral release, and has rotating heel pins that won’t wear the heel inserts in your boot as fast as a U-spring design will.

For U-spring bindings like the Alpinist, it becomes extra important to keep a close eye on the heel inserts of your boots to make sure there isn’t excessive wear developing, as it can affect the release properties of the binding.

Durability

Though the play in the Alpinist heel tower is definitely a concern when it comes to long-term durability, we haven’t experienced any signs of abnormal wear on our pair of the Alpinist.

Much of the binding is made from carbon-reinforced plastic, and it feels surprisingly solid considering the amount of plastic in the binding.

We’ll be putting a lot more days on all the bindings in this test next season, and will be sure to keep this review updated if any noteworthy durability issues arise.

Who’s It For?

The Alpinist will work best for those who strongly dislike the harsh feedback of most lightweight pin bindings, and will work even better for those who tour in places where you’re able to set more mellow skin tracks.

Bottom Line

The Marker Alpinist 12 is a feature-rich, lightweight touring binding that offers a surprisingly smooth and confidence-inspiring ride on the downhill, but that has a few quirks when it comes to transitions, stepping in, and walking uphill. If you’re looking for a lightweight touring binding for long days and high peaks — especially if you prioritize downhill performance over ease of use — the Alpinist 12 is definitely worth a look.

36 comments on “2020-2021 Marker Alpinist 12”

  1. Maybe the tilt mechanism of the heel piece explains the smoothness while skiing? Could also explain the loss of pop (it gets filtered out)?

    • Hey Konsta, I think the play in the heel could act like a low pass filter and contribute to the smoothness. It’s hard to figure out exactly why certain products feel the way they do without being able to tinker around a bit with different versions.

  2. “I’ve skied some pretty firm, rough, steep snow on the Alpinist and haven’t yet experienced any pre-releases, or felt the need to lock out the toe ”

    Don’t ever lock out your toe, just asking for knee injuries in a fall.

  3. I bought it. Stepping in is pretty okayish (with Dynafit vulcan), In difficult condition im “locking” one pin and then the rest.. Im 100kg 1.93m high and using Alpinist 9. No prereleases, skied inbound and outbound. The back of the ski falls okay in kick turns, even with my binding moved 1cm back from center. The brake looks like a joke, soft spring, small travel under the ski, locking is pretty hard and if there will be icing between tower amd the locking wire, you will spend some time clearing it.

    • Hey Alex, the Alpinist is way more minimalistic than those bindings. It won’t be as durable or as feature rich as the heavier offerings.

  4. does this thing ski better downhill because of the brake pad under the boot sole? did you ski it without the brake, in which case I assume it rests solely on the pins with no support under the boot sole in harder turns etc? Seems pretty important/relevant to how this thing skis to me, but I’d rather it without brakes.

  5. Is the difference between the Alpinist 9 and 12 just the available U-springs it comes with? Or does the 9 use also use lighter, perhaps less durable materials elsewhere?

  6. Thanks for the review, this helped make my decision. I’m getting the Alpinist 12, but my release value will probably be about a 9 (my calculated DIN value is 8, I set my Ions at 9-10). Do you recommend swapping to the medium spring? Have you heard/experienced any differences in ease of entry in ski mode with the high/med/low springs?

    • Hey Christian,

      You will likely notice a difference is ease of step in with the heavier U-spring. I typically set my touring bindings to an 8-9 and I haven’t had any release issues with the standard U-spring — but I also rarely release from my bindings in general.

  7. Hey Sam,
    I’ve just purchased and mounted the Alp 12 to replace my Kingpins, in an attempt to lighten up my touring set up. I’ve skied them a few times now and find that I’m having to fight to stay off my tails /heels. As everything else is the same (boots, skis, mounting position), and the toe pieces are essentially the same, I have to assume it’s somehow due to the minimalist heel. I can’t wrap my head around how that could result in difficulty getting on to the shovels. Any insights?

    • Hey BK,

      One thing I would start with is measuring the mount point. When doing a second mount on a ski, you often can’t maintain the same mount point because the holes get too close. I suspect that your mount point has moved a bit.

      Off the top of my head, I don’t know the ramp angle of the two bindings, but that could be something contributing as well.

      I’ve never felt a tech heel making it difficult to drive a ski… but it could be possible. What skis are these on?

      Best,
      Sam

      • Hey Sam,
        Since the Alpinist and Kingpin have the same mounting pattern for 6 of the 8 holes, only 2 new holes were needed for the much shorter heel pieces and thus did not interfere. So mounted in the same spot. The skis are Volkl BMT 109’s.
        The delta for the Kingpins is 9.5mm.
        Alpinist is 2mm.
        So, yeah I wondered about that too. In fact just today, I fab’d and installed a 5mm shim on the heels.
        I’ll check in once I’ve had a chance to ski them again.
        Thanks.

        • Ahhhhh, sounds like it is definitely the ramp angle. 7.5 mm is a pretty large jump (depending on your BSL).

          I hope the shims help out!

  8. I’m considering doing the exact same changeover (kingpin to alpinist)

    Curious to know how you fabbed a shim. Did you just construct a plate to go under the alpinist heel and use longer screws, or did you do something to your boots?

  9. Hi BK, what boots are you using? I have switched to alpinists, too. Quite a change, the reduced delta. I think I like it, but maybe splittung the difference is even better?

  10. Hey BK, was the length adjustment ok when re mounting the Alpinists? i.e. if my kingpins are mounted approximately middle of their fore/aft travel for my current boots, will the Alpinist heel mount in a position that still works (when using two existing holes). I kind of assume from you only re drilling two holes that this was the case (unless you also changed boots?) – or maybe it required a little fore or aft adjustment?

  11. Bought these mounted on a new pair of DPS Lotus Tour1. On the second day of use, a beautiful sunny day with presh pow, I make three turns and the binding breaks. Whole heel piece just slid back so the pins dont reach the boot. And the new lanyard gets sliced off. Had to walk down the mountain to get my ski, then walk down to the lift that could bring me off the mountain. Got in touch with Marker and they just referred me to a link to find nearby dealers. Very disappointed.

  12. Hey guys! Thanks for great review! I have the Alpinist 12 and have been really psyched on them so far, however, I have always had one question about the bindings: where do you attach the leash?? I have figured out how to attach mine with an additional loop of small cord, but since you can buy actual Alpinist 12 leashes I presume that they are designed to be compatible with the binding. I haven’t found answers in the owner’s manual and have emailed Marker customer service but never heard back. Thanks!

  13. You’ll find answers in the Q+A section of skimo.co’s listing for the Alpinist leash – https://skimo.co/marker-alpinist-leashes. If the bindings are already mounted, you may need to use a length of thin wire to pull the leash’s string loop through the leash mounting hole.
    It’s such a PITA that manufacturers design and sell elegant & sophisticated products (often laden with great features) but then don’t offer any info or guidance about how to use the things. Very lazy.

  14. Longish-term durablity report from Finland.

    Been touring on Alpinist 12 for around 50 days. A few of the bolts/rivets that connect the pin-wings to the frame of the toe piece are moving slightly outwards, evident by small washers coming loose between the end of the bolt and the binding frame. However there is no slop between the wings and the frame. Would not want the bolts to give up on any big mountain though. Seems like I’ll need to send them back to the retailer for a warranty inspection. Anyone else seeing this kind of wear?

  15. Hi. Thanks for the excellent review and also appreciated the good questions/responses that followed.

    I’m considering the Alpinist 12 or the Plum Oazo 8. Wondering if Blister has any thoughts on comparison? I’m leaning slightly toward the Oazo given its all alu construction, seemingly easier/taller heel risers, and lower weight. But, I’m tempted by the reports of Alpinist 12’s solid downhill performance (I have G3 Zed 12s, also gapless bindings, and have come to appreciate the heel elasticity).

    Thanks for any insights.

  16. Be careful with the pin that holds the heel riser! I lost my heel riser during a trip and this left my bindings useless. I’ve been in contact with Marker to get a replacement but it seems that this is not available! This is very bad customer service!!!

  17. I’m having a major problem with one of my pairs of Alpinists… Pretty disappointed with Marker’s non-existent customer service compared to other BC ski companies like G3 or Dynafit, so I don’t think I’ll be buying any of their products again! Not to mention this obviously common failure point in their internal design (see Reddit thread here where multiple people report this problem: https://www.reddit.com/r/skimo/comments/s8ppst/can_i_repair_this_marker_alpinist_12_heel_is/) ….

    But I do have two pairs of alpinists that I’d like to keep using, so if anyone on here could be more helpful than Marker (fairly easy to do) that would be great.

    I thought my issue was frustrating, but it is absolutely bonkers that they won’t send the guy above me a heel riser! Plenty of other good gear manufacturers out there in this day and age, so stay away from Marker.

  18. Hey Guys! great review. I’m thinking about getting this binding – just cant decide between the Alpinist 10 and 12. From the DIN charts I; getting the 7. Alpinist 10 is from 4 to 10, where I would fall in the middle. In the Alpinist 12 I’d be at the lower end of the spectrum 6-12.

    I’m 5’11 and 202lbs 41yo and type 2 skier. If i have a choice I’d ski slower than faster, no speed deamon

  19. I’ve had Alpinist 8 for 4 seasons now and super happy with them. I have been skiing them without the brakes but now thinking of putting them on. Would you know whether most recent version of the brakes are compatible with my 2020 Aplinists?

Leave a Comment